Some Tips To Select The Right Crane

some tips to select the right crane

These valuable tips will help you select the right crane for your project

Cranes have been used by humans from a long time. Now, work in almost any industry is impossible without cranes. If you have a project that would require the use of a crane, you need to research about what kind of crane would serve the purpose.

The information that you require would be related to proper load rating of the crane, the type of ground where the crane has to operate and other factors. You would need all of that information before reaching a decision on which crane to use.

Crane tips has brought numerous knowledgeable articles for its readers and it keeps providing quality information. This article presented here is in the form of a series of questions and answers that would help you reach the right decision about your crane.

Read the complete article to learn how to select the right crane!

The questions and answers related to the topic are presented below:

How High is the Work to Be Done?

The height of the work is going to impact how the boom is set up, as well as what kind of boom will be necessary. Furthermore, the extension of the crane’s boom can be affected by the wind, which increases exponentially as the height increases. In addition, the amount of counterweight needed to heft loads to ever-increasing heights needs to be calculated differently versus if the height is lower. Tower cranes now have dramatically higher capacity than they once did, and they can often lift over 1,000 meters into the air.

What Material and Condition is the Ground Beneath the Crane?

Cranes need a solid support structure beneath them to support the load and to keep their movement stabilized. While truck mounted cranes are often useful when there is concrete to support the crane itself, outriggers are sometimes not enough on unstable terrain. Rough terrain cranes offer the necessary mobility for grass or dirt surfaces without compromising most of the strength. When there is an uneven substrate, you need to consider the width of the crane’s base.

What Kinds of Obstacles are There?

In many environments, especially urban and suburban ones, cranes need to be adapted to circumventing obstacles. In addition to winds, there may be power lines, other buildings and other obstacles that can keep a crane from being able to simply raise the load directly from its origin point to its destination. In some instances, even the control scheme the crane uses can be difficult in the presence of obstacles, with pendant station cables getting caught. Radio controls may be more effective and less potentially hazardous.

How May the Crane Affect the General Public?

Just like how tower cranes are affected heavily by windy weather, the public in the area the crane is operating may be affected by this operation. If the crane’s size impacts the flow of traffic beyond a reasonable threshold, this can cause problems for the entire construction site. Further, if the crane is likely to cause issues with the operation of nearby buildings, this needs to be taken into consideration prior to selecting the type of crane you are going to use for your project.

To learn more about picking the right crane, read the full article on tips how to select the right crane!

Tips To Handle Construction Risk

Some tips to handle construction risk

Some handy tips to help you handle construction risk

Construction has always been a very prolific field. It has continued to be an ever-green field with numerous jobs for people with different backgrounds.  In addition to being a great field, construction also has certain risks that other fields do not have. In fact, it may not be wrong to say that construction is one of the riskiest fields out there.

Crane Tips is all about cranes and construction. We deeply care about our valuable readers and that is the reason we share great information with all of you on a regular basis.

As stated above, construction is indeed a difficult and risky field but the risks in construction can be handled and lowered by employing some tips and following certain strategies.

The strategies to manage the risks in construction are presented here, so that you can handle the project in a safe and wise manner.

Do not miss out the golden tips to manage construction risk by reading the complete article!

Allocate Risk

The contract negotiation and preparation phase is the best time for all project leaders, including the owner, contractors, architects, and building manager, to come together and anticipate all potential risks and assign responsibility of those risks to parties most apt to handle them should the unwanted arise. For example, the building owner and architect should be charged with ensuring design and environment issues are worked out and should draft a plan in case something arises. Meanwhile, contractors should be charged with ensuring personnel are equipped with all the necessary safety guidelines and understand how best to maneuver the environment with equipment in a safe and secure manner.

Managing Funding Risks and Feasibility Risks

These two types of risks are commonly described as “invisible risks” as they are rarely apparent until they are, in which they change the entire game. Yet, with careful preparation and research, most undertaking construction tasks can avoid them.

The first, feasibility risks, arise most commonly out of environmental issues that were not fully addressed in the original plan proposal. They include things like:

  • Extreme weather-based delays
  • Unforeseen factors of a specific location
  • New issues with coding and zoning laws

The ‘Management’ in Risk Management

Finally, it is important to note that this article is entitled with “managing construction risks” because the critical lesson here is not how to avoid all unwanted occupancies, but how to cope with the inevitable. Here, you research, prepare, and assign. Understand all of the potential issues with a construction project, consult with the available experts and professionals, set aside budgets to deal with funding risks, and ensure you have the right insurance in place before signing contracts.

Learn more about this important topic by reading the complete guide on managing construction risk.

Some Things You Must Learn Before Buying LED Light Bars

You must learn these before buying LED light bars

These are a few things you must learn before buying LED light bars

A good lighting is very important if you have a factory or facility where works need to be done uninterrupted day and night. The best solution in such a case is to opt for LED light bars. Similarly, if you have the soul of an adventurer and you want to explore and roam around the terrain in your ATV, 4×4 vehicle or motorcycle, then LED driving lights are your best bet. The reason behind using LED light bars and driving lights is simple; they are absolutely the best solution available in the market. Crane Tips has always been concerned with the safety of its readers, especially those in the construction sector or crane business. We have always provided great quality content to our valuable readers and that is the reason we have also selected this particular article which explains a few things that one needs to know before buying LED light bars. Interested in getting the perfect lighting solution? You need to read the complete article to learn more!

Lumens, not watts

Forget what you know about incandescent lamps — your watts are no good here. When shopping for bulbs, you’re probably accustomed to looking for watts, an indication of how bright the bulb will be. The brightness of LEDs, however, is determined a little differently. Contrary to common belief, wattage isn’t an indication of brightness, but a measurement of how much energy the bulb draws. For incandescent lamps, there is an accepted correlation between the watts drawn and the brightness, but for LEDs, watts aren’t a great predictor of how bright the bulb will be. (The point, after all, is that they draw less energy.)

You’ll pay more for an LED light bar

LED light bars are like hybrid cars: cheaper to operate but pricey upfront. When switching to LED light bars, don’t expect to save buckets of cash. Instead, think of it as an investment. Luckily, competition has increased and LED light bars have come down in price but you should still expect to pay much more than an incandescent light. Eventually, the LED light bars will pay off, and in the meantime, you’ll enjoy less heat production and longer lifespan. You need to read the full article explaining the things you need to know before getting LED light bars, in order to learn more about this topic,

Hand Signal Guide For Crane Operators and Crew

Hand signal guide for crane operators

This hand signal guide is for crane operators to work safely

Crane operators must be very skilled and need to be trained properly so that they can perform their jobs efficiently and safely. While working on any site, the operators also require some assistance from the crew or workers present on the site.

The work sites are usually bustling with life, energy and activity during a project and are often so noisy that you cannot communicate easily. People use radio sets or walkie talkies to reach out to each other in such places.

Crane operators are professionals who are entrusted with the loading, movement and carrying of various heavy objects as a part of their daily activities. It is very important to guide the operators during the crane operation to ensure there are no accidents.

We ensure to keep providing you good tips for crane operation and so we have taken a wonderful and important article from TNT Crane & Rigging so that you can get benefited by this valuable information.

The crew or workers must use their hand signals to guide the operators to ensure safety during the process. This article is comprised of definitions and explanations of different hand signals that can be used in order to help the crane operators.

Read the complete article to learn more about this important topic!

Here are the different hand signals used for crane operation, along with their explanations:

Use Main Hoist

There are going to be occasions when the main hoist is necessary for its greater strength. In these instances, the signaler cocks their right arm outward and bends their elbow outward, which allows the signaler to tap on their hard hat with their closed hand as if they were knocking on a door.

Use Whip Line

On some occasions, the whip line or fast line may be preferable to the main hoist. To signal using the whip line, the signaler places his/her left arm horizontally across the front of the body, palm upward. The signaler then makes a forward-facing fist with the right hand, and puts the right elbow into his/her left palm in front of themselves.

Raise Boom

To raise the boom, the signaler begins with the right arm outstretched to the side. From there, the signaler points the thumb upward.

Lower Boom

To lower the boom is the reversal of the signal to raise the boom. The signaler begins with the right arm outstretched to the side. From there, they point their thumb downwards.

Swing

It can be necessary to turn or swing the crane. In these instances, the signaler extends the right arm straight outward to the side, with the palm facing downward.

Extend Boom

The boom or primary arm of the crane, must sometimes be extended for its reach. In some cases the boom can be extended independently of lowering or raising it. When the boom must be extended, the signaler places his/her closed hands on either side of their body at hip height, with both thumbs facing outward.

Retract Boom

Retracting the boom can often exert greater leverage with better stability than when the boom is extended. When the boom must be retracted, the signaler places their closed hands at around waist height, with thumbs pointing inward toward their body.

Read the complete article explaining different hand signals for guiding crane operators to learn more about this important aspect of safe crane operation.